XJ4Ever.com
PO Box 98393
Atlanta, GA 30359-8393
Info@xj4ever.com


Home - Catalog - How-To's - XJBikes.com Forum


SECTION D:

ELECTRICAL SYSTEM:

--Chassis Electrical System: Turn Signals, Side Reflectors, Rear Reflectors, Tail Lights, Brake Lights, License Plate Lights, Lenses, Bulbs, Flashers, and related hardware, etc.



FRONT SIDE and REAR REFLECTORS:

Your front SIDE REFLECTORS, although not electrically powered, serve a vital and valuable function----they let people approaching from the side see you, and hopefully take enough notice to avoid plowing into you (or scaring you half to death, thinking that they're about to!).

Your REAR REFLECTOR is an "always-there" helper for your brake light, and make you much more visible and less likely to be run over.

Make sure your reflectors are up to their task, as age, heat, and solvents can migrate down behind the lense unit and discolor or darken the reflector significantly.


Front Side Reflectors:

HCP706 OEM front SIDE REFLECTOR, this rectangular yellow reflector lense comes with the chrome metal surround bezel, and fits either side on all XJ550 Maxim, XJ650 Maxim and Midnight Maxim, all XJ750 models, and XJ1100 models. Each:
$ 59.95


HCP3627SS OEM front SIDE REFLECTOR, this round yellow reflector lense fits either side on all XJ550 Seca models without a fairing (on the lower steering bracket), and all XJ650RJ Seca models (on the headlight bucket), and on 1979 XS1100 Special models. This replacement unit is the same shape and style as the original, but has a black outer rim instead of the brightly plated rim as originally used. Each:
$ 12.95

HCP11513 Aftermarket front SIDE REFLECTOR, this round yellow reflector lense fits either side on all XJ550 Seca models without a fairing (on the lower steering bracket), and all XJ650RJ Seca models (on the headlight bucket), and 1979 XS1100 Special models. Measures approximately 57mm in diameter, slightly smaller than original, has a bright rim, and comes with the mounting stud flat washer and nut. Each:
$ 6.95

HCP11512 Aftermarket front SIDE REFLECTOR, this round yellow reflector lense fits either side on all XJ550 Seca models without a fairing (on the lower steering bracket), and all XJ650RJ Seca models (on the headlight bucket), and 1979 XS1100 Special models. Measures approximately 57mm in diameter, slightly smaller than original, has a black rim, and comes with the mounting stud flat washer and nut. Each:
$ 6.95



HCP708 OEM front SIDE REFLECTORS, this square yellow reflector lense fits either side on all XJ550 Seca models with a fairing, all FJ600, XJ650 Turbo models, XJ750 Seca models using the optional factory "touring package" front fairing, and all XJ900RK models with the fairing. Has a bright outer rim. Each:
$ 44.95

HCP11473 Aftermarket front SIDE REFLECTORS, square yellow reflector lense fits either side on all XJ550 Seca models with a fairing, all FJ600, XJ650 Turbo models, XJ750 Seca models using the optional factory "touring package" front fairing, and all XJ900RK models with the fairing. Has a black outer rim. Includes mounting nut and washer. Each:
$ 19.95



HCP707 OEM front SIDE REFLECTORS, this rectangular yellow reflector lense fits down on the lower fork tube on either side on all XJ700 and XJ750-X models. Each:
$ 26.95




Front Side Reflector Hardware:

HCP3638 OEM front side reflector MOUNTING BRACKET, fits either side, for all XJ900RK models. Each:
$ 8.50


HCP3696 OEM front side reflector lense short mounting SCREW, bright plated finish phillips-drive. Use one per reflector on the following models: 1981 XJ550 Maxim and XJ1100 models. Each:
$ 2.95

HCP5482 Aftermarket front side reflector lense short mounting SCREW, zinc-plated alloy steel, phillips-drive panhead screw. Use one per reflector on the following models: 1981 XJ550 Maxim and XJ1100 models. Each:
$ 1.00

HCP21356 Aftermarket front side reflector lense short mounting SCREW, 18-8 stainless steel, phillips-drive panhead screw. Use one per reflector on the following models: 1981 XJ550 Maxim and XJ1100 models. Each:
$ 1.50

HCP5486 Aftermarket front side reflector lense short mounting SCREW, phillips-drive panhead screw with gold chromate finish. Has an integral lockwasher. Use one per reflector on the following models: 1981 XJ550 Maxim and XJ1100 models. Each:
$ 1.95

HCP5483 Aftermarket front side reflector lense short mounting SCREW, socket head cap screw (hex-drive), 18-8 stainless steel with a bright polished finish. Use one per reflector on the following models: 1981 XJ550 Maxim and XJ1100 models. Each:
$ 1.50

HCP5484 Aftermarket front side reflector lense short mounting SCREW, socket head cap screw (hex-drive), black-oxide coated steel finish. Use one per reflector on the following models: 1981 XJ550 Maxim and XJ1100 models. Each:
$ 1.50

HCP5485 Aftermarket front side reflector lense short mounting SCREW, button head cap screw (rounded head hex-drive), 18-8 stainless steel with a bright polished finish. Use one per reflector on the following models: 1981 XJ550 Maxim and XJ1100 models. Each
$ 1.50


HCP3633 OEM brake light switch MOUNTING SCREW, for use on all XJ900 N, FN, and F models, use 1 per bike, each:
$ 1.95

HCP23024 Aftermarket brake light switch MOUNTING SCREW, for use on all XJ900 N, FN, and F models, use 1 per bike, zinc-plated alloy steel as original, each:
$ 1.00

HCP23025 Aftermarket brake light switch MOUNTING SCREW, for use on all XJ900 N, FN, and F models, use 1 per bike, 18-8 stainless steel, each:
$ 1.50


HCP3629 OEM front side reflector lense long mounting SCREW, bright plated finish phillips-drive. Used one per reflector on the following models: 1981 XJ550 Maxim, all XJ650 Maxim models, and all XJ750 non-X models. Each:
$ 3.95

HCP23033 Aftermarket front side reflector lense long mounting SCREW, zinc-plated alloy steel with correct JIS small phillips-drive panhead design. Used one per reflector on the following models: 1981 XJ550 Maxim, all XJ650 Maxim models, and all XJ750 non-X models. Each:
$ 2.95

HCP23034 Aftermarket front side reflector lense long mounting SCREW, zinc-plated alloy steel with phillips-drive panhead design. Used one per reflector on the following models: 1981 XJ550 Maxim, all XJ650 Maxim models, and all XJ750 non-X models. Each:
$ 1.00

HCP23035 Aftermarket front side reflector lense long mounting SCREW, 18-8 stainless steel with phillips-drive panhead design. Used one per reflector on the following models: 1981 XJ550 Maxim, all XJ650 Maxim models, and all XJ750 non-X models. Each:
$ 1.50


HCP3956 OEM front side reflector lense long mounting SCREW, bright plated finish phillips-drive. Used one per reflector on the following models: 1982-3 XJ550 Maxim models. Each:
$ 1.95

HCP23030 Aftermarket front side reflector lense long mounting SCREW, 18-8 stainless steel with correct JIS small phillips-drive panhead design. Used one per reflector on the following models: 1982-3 XJ550 Maxim models. Each:
$ 2.95

HCP23031 Aftermarket front side reflector lense long mounting SCREW, zinc-plated alloy steel with phillips-drive panhead design. Used one per reflector on the following models: 1982-3 XJ550 Maxim models. Each:
$ 1.00

HCP23032 Aftermarket front side reflector lense long mounting SCREW, 18-8 stainless steel with phillips-drive panhead design. Used one per reflector on the following models: 1982-3 XJ550 Maxim models. Each:
$ 1.50



HCP7532 OEM front side reflector lense long mounting SCREW, bright plated finish phillips-drive. Used one per reflector on the following models: XJ1100 models. Each:
$ 1.95

HCP23026 Aftermarket front side reflector lense long mounting SCREW, zinc-plated alloy steel with correct JIS small phillips-drive panhead design. Used one per reflector on the following models: XJ1100 models. Each:
$ 1.75

HCP23027 Aftermarket front side reflector lense long mounting SCREW, zinc-plated alloy steel, phillips-drive panhead design. Used one per reflector on the following models: XJ1100 models. Each:
$ 1.00

HCP23028 Aftermarket front side reflector lense long mounting SCREW, 18-8 stainless steel, phillips-drive panhead design. Used one per reflector on the following models: XJ1100 models. Each:
$ 1.00




HCP328 OEM front side reflector lense mounting screw FLAT WASHER, use one each on both the upper and lower screws on the following models: all XJ550 Maxim models, XJ650 Maxim and Midnight Maxims models, all XJ750 non-X models, and all XJ1100 models. Each:
$ 1.95

HCP924 Aftermarket zinc-plated, alloy-steel, natural finish front side reflector lense mounting screw FLAT WASHER, use one each on both the upper and lower screws on the following models: all XJ550 Maxim models, XJ650 Maxim and Midnight Maxims models, all XJ750 non-X models, and all XJ1100 models. Each:
$ 0.95

HCP338 Aftermarket 18-8 stainless-steel polished finish front side reflector lense mounting screw FLAT WASHER, use one each on both the upper and lower screws on the following models: all XJ550 Maxim models, XJ650 Maxim and Midnight Maxims models, all XJ750 non-X models, and all XJ1100 models. Each:
$ 0.95

HCP28050 Aftermarket grade 316 stainless-steel polished finish front side reflector lense mounting screw FLAT WASHER, use one each on both the upper and lower screws on the following models: all XJ550 Maxim models, XJ650 Maxim and Midnight Maxims models, all XJ750 non-X models, and all XJ1100 models. Each:
$ 0.95

HCP1356 Aftermarket black oxide-coated steel finish front side reflector lense mounting screw FLAT WASHER, use one each on both the upper and lower screws on the following models: all XJ550 Maxim models, XJ650 Maxim and Midnight Maxims models, all XJ750 non-X models, and all XJ1100 models. Each:
$ 1.95



HCP3625 OEM front side reflector lense mounting screw FLAT WASHER, bright zinc-plated alloy steel. Use one on each reflector stud on the following models: all XJ550 Seca models, XJ650RJ Seca and Turbo models, all XJ900 models, and 1979 XS1100 models. Each:
$ 2.95

HCP914 Aftermarket front side reflector lense mounting screw FLAT WASHER, bright zinc-plated alloy steel. Use one on each reflector stud on the following models: all XJ550 Seca models, XJ650RJ Seca and Turbo models, all XJ900 models, and 1979 XS1100 models. NOTE: this washer is slightly smaller and thinner than the original washer, but this change will make no difference in fitment nor function. Each:
$ 1.00

HCP1353 Aftermarket front side reflector lense mounting screw FLAT WASHER, bright 18/8 stainless steel. Use one on each reflector stud on the following models: all XJ550 Seca models, XJ650RJ Seca and Turbo models, all XJ900 models, and 1979 XS1100 models. NOTE: this washer is slightly smaller and thinner than the original washer, but this change will make no difference in fitment nor function. Each:
$ 1.00

HCP65 Aftermarket front side reflector lense mounting screw FLAT WASHER, black oxide-coated stainless steel. Use one on each reflector stud on the following models: all XJ550 Seca models, XJ650RJ Seca and Turbo models, all XJ900 models, and 1979 XS1100 models. NOTE: this washer is slightly smaller and thinner than the original washer, but this change will make no difference in fitment nor function. Each:
$ 1.95



HCP55 OEM front side reflector lense mounting screw LOCK WASHER, use one on each reflector stud on the following models: all XJ550 Seca models,1984-85 FJ600, XJ650RJ Seca and XJ650 Turbo models, and 1979 XS1100 Special models. Each:
$ 1.95

HCP913 Aftermarket zinc-plated alloy steel with a natural finish, front side reflector lense mounting screw LOCK WASHER, use one on each reflector stud on the following models: all XJ550 Seca models,1984-85 FJ600, XJ650RJ Seca and XJ650 Turbo models, and 1979 XS1100 Special models. Each:
$ 1.00

HCP57 Aftermarket 18-8 stainless steel, front side reflector lense mounting screw LOCK WASHER, use one on each reflector stud on the following models: all XJ550 Seca models,1984-85 FJ600, XJ650RJ Seca and XJ650 Turbo models, and 1979 XS1100 Special models. Each:
$ 1.00

HCP59 Aftermarket black oxide-coated alloy steel, front side reflector lense mounting screw LOCK WASHER, use one on each reflector stud on the following models: all XJ550 Seca models,1984-85 FJ600, XJ650RJ Seca and XJ650 Turbo models, and 1979 XS1100 Special models. Each:
$ 1.00



HCP3632 OEM front side reflector lense mounting screw NUT, use one on each reflector stud on the following models: all XJ550 Seca models, FJ600, XJ650RJ Seca and XJ650 Turbo models. Each:
$ 2.95

HCP24055 Aftermarket front side reflector lense mounting screw NUT, use one on each reflector stud on the following models: all XJ550 Seca models, FJ600, XJ650RJ Seca and XJ650 Turbo models. Bright zinc-plated steel. Each:
$ 1.25

HCP24056 Aftermarket front side reflector lense mounting screw NUT, use one on each reflector stud on the following models: all XJ550 Seca models, FJ600, XJ650RJ Seca and XJ650 Turbo models. Bright 18/8 stainless steel. Each:
$ 1.95

HCP24057 Aftermarket front side reflector lense mounting screw NUT, use one on each reflector stud on the following models: all XJ550 Seca models, FJ600, XJ650RJ Seca and XJ650 Turbo models. Bright 316 stainless steel. Each:
$ 2.25



HCP3635 OEM front side reflector lense mounting screw NUT, use one on each reflector stud on the following models: all XJ700 and XJ750-X models. Each:
$ 1.00

HCP3636 OEM front side reflector lense mounting screw NUT, use one on each reflector stud on the following models: all XJ900RK models. Each:
$ 2.25




Rear Reflectors:

HCP710 OEM rear REFLECTOR, this rectangular red reflector lense is used on all FJ600, XJ650RJ Seca models, all XJ650 Turbo models, all XJ750 Maxim, and all XJ1100 models. Each:
$ 22.95

HCP11474 Aftermarket rear REFLECTOR, this rectangular red reflector lense fits on the rear grab bar on all XJ700 and XJ750-X models. Black outer rim. Each:
$ 12.95

HCP13739 OEM rear REFLECTOR, this rectangular red reflector lense fits on all FJ600 and XJ900RL, N/FN, and F models. Each:
$ 14.95



Rear Reflector Hardware:

HCP10845 OEM rear reflector base mounting BOLT, secures the base housing to the fender. Used two per base on XJ1100 Maxim models. Each:
$ 1.25


HCP3625 OEM rear reflector lense stud FLAT WASHER, bright zinc-plated alloy steel. Use one on the reflector stud on the following models: all XJ900RL, N/FN, and F models, and XJ1100 models. Each:
$ 2.95

HCP914 Aftermarket rear reflector lense stud FLAT WASHER, bright zinc-plated alloy steel. Use one on the reflector stud on the following models: all XJ900RL, N/FN, and F models, and XJ1100 models. NOTE: this washer is slightly smaller and thinner than the original washer, but this change will make no difference in fitment nor function. Each:
$ 1.00

HCP1353 Aftermarket rear reflector lense stud FLAT WASHER, bright 18/8 stainless steel. Use one on the reflector stud on the following models: all XJ900RL, N/FN, and F models, and XJ1100 models. NOTE: this washer is slightly smaller and thinner than the original washer, but this change will make no difference in fitment nor function. Each:
$ 1.00

HCP65 Aftermarket rear reflector lense stud FLAT WASHER, black oxide-coated stainless steel. Use one on the reflector stud on the following models: all XJ900RL, N/FN, and F models, and XJ1100 models. NOTE: this washer is slightly smaller and thinner than the original washer, but this change will make no difference in fitment nor function. Each:
$ 1.95



HCP55 OEM rear reflector lense mounting LOCK WASHER, use as specified on the following models: all FJ600, all XJ650 Turbo models on the reflector stud (1) and on the reflector support bracket stud to the upper bracket (1), all XJ750 Maxim models on the reflector stud (1), and on all XJ1100 models for the reflector base housing to fender mounting bolts (2) and on the reflector stud (1). Each:
$ 1.95

HCP913 Aftermarket zinc-plated alloy steel with a natural finish, rear reflector lense mounting LOCK WASHER, use as specified on the following models: all FJ600, all XJ650 Turbo models on the reflector stud (1) and on the reflector support bracket stud to the upper bracket (1), all XJ750 Maxim models on the reflector stud (1), and on all XJ1100 models for the reflector base housing to fender mounting bolts (2) and on the reflector stud (1). Each:
$ 1.00

HCP57 Aftermarket 18-8 stainless steel, rear reflector lense mounting LOCK WASHER, use as specified on the following models: all FJ600, all XJ650 Turbo models on the reflector stud (1) and on the reflector support bracket stud to the upper bracket (1), all XJ750 Maxim models on the reflector stud (1), and on all XJ1100 models for the reflector base housing to fender mounting bolts (2) and on the reflector stud (1). Each:
$ 1.00

HCP59 Aftermarket black oxide-coated alloy steel, rear reflector lense mounting LOCK WASHER, use as specified on the following models: all FJ600, all XJ650 Turbo models on the reflector stud (1) and on the reflector support bracket stud to the upper bracket (1), all XJ750 Maxim models on the reflector stud (1), and on all XJ1100 models for the reflector base housing to fender mounting bolts (2) and on the reflector stud (1). Each:
$ 1.00



HCP3624 OEM rear reflector mounting NUT, use one on the reflector stud on XJ650RJ Seca models. Each:
$ 1.95


HCP3632 OEM rear reflector lense mounting stud NUT, use one on the reflector stud to secure it to the bracket on the following models: all 1984-85 FJ600, XJ650 Turbo, XJ750 Maxim, and XJ1100 models. Each:
$ 2.95

HCP24055 Aftermarket rear reflector lense mounting stud NUT, use one on the reflector stud to secure it to the bracket on the following models: all 1984-85 FJ600, XJ650 Turbo, XJ750 Maxim, and XJ1100 models. Bright zinc-plated steel. Each:
$ 1.25

HCP24056 Aftermarket rear reflector lense mounting stud NUT, use one on the reflector stud to secure it to the bracket on the following models: all 1984-85 FJ600, XJ650 Turbo, XJ750 Maxim, and XJ1100 models. Bright 18/8 stainless steel. Each:
$ 1.95

HCP24057 Aftermarket rear reflector lense mounting stud NUT, use one on the reflector stud to secure it to the bracket on the following models: all 1984-85 FJ600, XJ650 Turbo, XJ750 Maxim, and XJ1100 models. Bright 316 stainless steel. Each:
$ 2.25


HCP3635 OEM rear reflector lense mounting NUT, use one on the reflector stud on the following models: all XJ700 and XJ750-X models. Each:
$ 1.00

HCP3636 OEM rear reflector lense mounting screw NUT, use one on each reflector stud on the following models: all XJ900RL, N/FN, and F models. Each:
$ 2.25

Return to Top of Page