XJ4Ever.com
PO Box 98393
Atlanta, GA 30359-8393
Info@xj4ever.com


Home - Catalog - How-To's - XJBikes.com Forum

GENERAL PURPOSE TOOLS:

PERSONAL PROTECTION:

"Without safety, there can be no progress".
-Archimedes, 250 B.C.


Work Apron:

Made from a heavy duty canvas material, this mid-length, tie-on MECHANIC'S APRON has fully bound edges, is double-stitched at all stress points, and has front tool pockets to allow you to carry your primary weapons into battle that much easier. One size fits all.

HCP14647 Aftermarket canvas WORK APRON.
$ 38.95



Safety Glasses:

Chemical splashes, metal fragments, paint over-spray, and sharp metal objects at close proximity to your eyeballs is-----as your Mother used to warn you about----"a good way to put your eye out".........which really puts the bummer into your day and your future riding (or lack of) days.

HCP12998 Aftermarket polycarbonate plastic SAFETY GLASSES, the big nerdy-looking kind with large sidepieces that gives you frontal and side protection. Cheap but effective. One size fits all, unless you're a ball player who has been on steroids since age 10 and have a head the size of a basketball.........
$ discontinued

HCP12999 Aftermarket plastic SAFETY GOGGLES, the cool-looking kind that the guys wear when launching F16J's of the carrier deck. Adjustable headband, precision toric lenses material, and their low-profile design along with anti-fog vents makes these the best affordable eye protection you can buy. Military gray. One size fits all.
$ 21.95



Ear Plugs:

Perhaps the most easiest safety device ever invented. Soft expandable tapered foam plugs fit easily and comfortably into the ear canal and prevent constant high-decibel or noise-level "spikes" from wreaking havoc. Wish I had used these in my youth at the Led Zep and UFO concerts! Comes as a "corded" set of plugs so you don't lose just one!!

HCP13055 Aftermarket standard-protection CORDED EAR PLUGS, one set does one head!
$ 1.50

HCP13057 Aftermarket maximum-protection CORDED EAR PLUGS, one set does one head!
$ 1.95



Rubber Work Gloves:

NOTE: latex is a natural rubber product, and skin irritation or even allergic reactions can occur with their use (about 10-15% of all people have allergies or develop allergies to natural rubber, such as skin rashes, itching, etc.). Cuts in your skin your increase your risk of allergic reaction. Some people are also sensitive to the powder used in the powdered style gloves, rather than to the latex itself. And some unlucky souls are sensitive or allergic to both. Sensitivity or allergic reactions can be either almost immediate (within 30 minutes of exposure) or delayed (up to 48 hours later).

Many carb or paint solvents and some petroleum oils will degrade latex back into its gooey, sticky original state!

So we offer a choice of LATEX GLOVES or non-allergenic NITRILE GLOVES, in ultra-thin (for work that requires the maximum in sensitivity), standard thickness, or ultra-thick versions that are chemical and solvent-resistant. Gloves come in either a standard-length (to the wrist) or extended-cuff versions that go over the wrist and up the forearm a bit, offering the ultimate in protection.


Ultra-Thin Gloves:

HCP13022MED Aftermarket black powder-less NITRILE GLOVES, standard-length and ultra-thin, strong enough to protect but with a fully textured skin for great control and "feel" of held objects (why does this sound like a condom commercial?). Box of 100 gloves, medium size.
$ 19.95

HCP13022LRG Aftermarket black powder-less NITRILE GLOVES, same features as above. Box of 100 gloves, large size fits most people.
$ 19.95

HCP13022XLG Aftermarket black powder-less NITRILE GLOVES, same features as above. Box of 100 gloves, extra-large size fits us ham-hock sized folks.
$ 19.95

HCP13022XXL Aftermarket black powder-less NITRILE GLOVES, same features as above. Box of 100 gloves, extra-extra-large size fits super-sized folks.
$ 19.95



HCP13023MED Aftermarket black powder-less NITRILE GLOVES, extended-length cuffs and ultra-thin. Box of 100 gloves, medium size.
$ 22.95

HCP13023LRG Aftermarket black powder-less NITRILE GLOVES, same features as above. Box of 100 gloves, large size fits most people.
$ 22.95

HCP13023XLG Aftermarket black powder-less NITRILE GLOVES, same features as above. Box of 100 gloves, extra-large size fits us ham-hock sized folks.
$ 22.95

HCP13023XXL Aftermarket black powder-less NITRILE GLOVES, same features as above. Box of 100 gloves, extra-extra-large size fits super-sized folks.
$ 22.95



Standard-Thickness Gloves:

HCP11238LRG Aftermarket white powder-less LATEX GLOVES, standard-length and standard thickness. Great for when you don't want to get your hands or under your fingernails stained or discolored. Box of 100 gloves, large size fits almost all people.
$ 12.95

HCP11238XLG Aftermarket white powder-less latex rubber LATEX GLOVES, same features as above. Box of 100 gloves, extra-large size fits us ham-hock sized folks.
$ 12.95



HCP13020MED Aftermarket black powder-less NITRILE GLOVES, standard-length and standard thickness. Box of 100 gloves, medium size.
$ 21.95

HCP13020LRG Aftermarket black powder-less NITRILE GLOVES, same features as above. Box of 100 gloves, large size fits most people.
$ 21.95

HCP13020XLG Aftermarket black powder-less NITRILE GLOVES, same features as above. Box of 100 gloves, extra-large size fits us ham-hock sized folks.
$ 21.95

HCP13020XXL Aftermarket black powder-less NITRILE GLOVES, same features as above. Box of 100 gloves, extra-extra-large size fits super-sized folks.
$ 21.95



Ultra-Thickness Gloves:

HCP11239LRG Aftermarket blue powdered LATEX GLOVES, extended-length and ultra-thick version that resists tears, punctures, and has increased chemical resistance. Extra-long wrist cuff for added protection. Box of 100 gloves, large size fits almost all people.
$ 17.95

HCP11239XLG Aftermarket blue powdered LATEX GLOVES, same features as above. Box of 100 gloves, extra-large size fits us ham-hock sized folks.
$ 18.95



HCP13021MED Aftermarket green powder-less ULTIMATE NITRILE GLOVES, extended-length and ultra-thick resists punctures or tearing and have exceptional solvent and chemical resistance. Flock-lined for comfort and treaded palms and fingers for non-slip security. Box of 50 gloves, medium size.
$ 29.95

HCP13021LRG Aftermarket green powder-less ULTIMATE NITRILE GLOVES, same features as above. Box of 50 gloves, large size fits most people.
$ 29.95

HCP13021XLG Aftermarket green powder-less ULTIMATE NITRILE GLOVES, same features as above. Box of 50 gloves, extra-large size fits us ham-hock sized folks.
$ 29.95

HCP13021XXL Aftermarket green powder-less ULTIMATE NITRILE GLOVES, same features as above. Box of 50 gloves, extra-extra-large size fits super-sized folks.
$ 29.95




Fabric Work Gloves:

The following FABRIC WORK GLOVES feature a very thin and flexible heat-resistant material in the palm and the fingers and a generous wrist cuff to both prevent bunching and for added burn protection. A high-friction material is added along the thumb and forefinger extensions which allows for greater control and manipulation of the objects being held or worked on.

Work Gloves are sized according to the following formula. Make sure you measure around the top of your knuckles or you'll be doing the "if the glove don't fit, you must acquit" thing, because they'll be too tight!:

Measurement of 7 - 8" uses a SMALL glove.
Measurement of 8 - 9" uses a MEDIUM glove.
Measurement of 9 - 11" uses a LARGE glove.
Measurement of 11 - 13" uses an EXTRA LARGE glove.

Gloves are all-black except for brightly colored racing stripes across the back of the glove, the thumb, and the two outer fingers tubes.

All WORK GLOVES are $ 19.95 per pair.


HCP11202BLKSML Small work gloves with black stripes.
HCP11202BLKMED Medium work gloves with black stripes.
HCP11202BLKLRG Large work gloves with black stripes.
HCP11202BLKXLG Extra Large work gloves with black stripes.


HCP11202BLUSML Small work gloves with blue stripes.
HCP11202BLUMED Medium work gloves with blue stripes.
HCP11202BLULRG Large work gloves with blue stripes.
HCP11202BLUXLG Extra Large work gloves with blue stripes.


HCP11202REDSML Small work gloves with red stripes.
HCP11202REDMED Medium work gloves with red stripes.
HCP11202REDLRG Large work gloves with red stripes.
HCP11202REDXLG Extra Large work gloves with red stripes.


HCP11202YELSML Small work gloves with yellow stripes.
HCP11202YELMED Medium work gloves with yellow stripes.
HCP11202YELLRG Large work gloves with yellow stripes.
HCP11202YELXLG Extra Large work gloves with yellow stripes.




HAND TOOLS:

As you'll quickly learn when you are doing a majority of your own mechanical work, the right tools, in the right size, shape, and style needed for the job are a necessity for avoiding the waste of time, effort, and errors.

And you'll also quickly learn what every experienced wrencher knows, holds dear, and has probably learned the hard way-----that quality tools ain't cheap, and, over time, they pay for themselves many times over, and in a variety of different ways. They will perform better, last longer, not damage items or be destroyed in use, and-----as long as you don't lend them to your friends or neighbors!-----will always be there for you, on your side and until the bitter end when an obnoxious screw or seized-tight bolt would shame and lay to waste a lesser tool.....

And, perhaps most important of all, you take better care of quality tools, and take pride in using them correctly, and sometimes that fact alone makes the difference between a task being successfully completed, or going back to square one and starting over.


JIS Screwdrivers:

mt1) Almost every screw on these bikes are "JIS" design screws, JIS standing for Japanese Industrial Standards, and both the depth and design on the phillips-head "slot" is different than typical US slots. In a nutshell, JIS screws (which can be easily identified by the small punched single "dot" on the screw head, in-between two of the screw slots) have both deeper and "squarer" slots and thus can hold more torque than their rest-of-the-world counterparts. They also require a JIS screwdriver to take full advantage of, and to prevent rounding out the slots as typical phillips screwdrivers will do. The more "rounded" edges of a standard phillips-drive screwdriver cannot exert as much torque on the screw head (by design, actually) and will "cam-out" of the slots, taking some of the slot material with it.....and then you have what is affectionately known as a !!#&$!?**#! stripped out screw head!

So it might be a good idea to also invest in a set of quality JIS screwdrivers; trust me, they make a difference (and yes, they can be used on standard phillips-drive screws, too).

We offer these tools in three different quality grades and styles to meet your particular needs:

* Standard-Grade screwdrivers are a low-cost alternative that do a fine job in light-duty use.
* Mechanics-grade screwdrivers are a heavy-duty design and is recommended for the typical home mechanic or shop.
* Impact-grade screwdrivers feature a hardened “head” and an internal cam-drive that rotates the shaft about 12-degrees when struck by a hammer -----similar to the operation of an impact driver, but in a much more useful form. These drivers look, feel, and operate just like a mechanic-grade screwdriver above, but can also be given a sturdy “whack!” to help persuade frozen fasteners to give up their grip. Highly recommended when working on the carbs (the upper and lower rack bracket screws are a beast to remove without an impact driver ) or in any number of other situations when working on seized or rusted fasteners.


Basic JIS Screwdriver Sets:

HCP21127 Aftermarket JIS-standards STANDARD-GRADE SCREWDRIVER SET. This set of 3 drivers contains one each of standard-length #1, #2, and #3 size phillips-drive, JIS-standard screwdrivers, and this range of sizes will handle everything down to an M2 sized screw (that's tiny, smaller than the size of the petcock faceplate mounting screws) all the way up to the biggest screws commonly used on these bikes. These standard-grade screwdrivers all feature a comfortable gel-covered handle, black-chrome plated steel shafts, and magnetized drive tips.
$ 42.95

HCP17479 Aftermarket JIS-standards MECHANICS-GRADE SCREWDRIVER SET. This set of 3 drivers contains one each of standard-length #1, #2, and #3 size phillips-drive, JIS-standard screwdrivers, and this range of sizes will handle everything down to an M2 sized screw (that's tiny, smaller than the size of the petcock faceplate mounting screws) all the way up to the biggest screws commonly used on these bikes. These mechanics-grade screwdrivers all feature sturdy comfort-grip handles, knurled chrome plated steel shafts, and “sure-grip” textured, magnetized drive tips.
$ 49.95

HCP23604 Aftermarket JIS-standards MECHANICS-GRADE SCREWDRIVER BITS SET. This set of 4 driver bits contains one each of 1/4” hex-drive bits in the #0, #1, #2, and #3 size phillips-drive, JIS-standard screwdriver bits, and this range of sizes will handle everything down to an M1 sized screw (that's tiny, smaller than the size of the petcock faceplate mounting screws) all the way up to the biggest screws commonly used on these bikes. These mechanics-grade screwdriver bits are approximately 1” long and are designed to be used in a 1/4” bit holder or similar..
$ 17.95



Carb Rebuild Screwdriver Sets:

HCP21183SET Aftermarket JIS-standard MECHANICS-GRADE SCREWDRIVER SET. This set of 3 drivers contains one each of the standard-length #2 and #3 size phillips-drive, JIS-standard screwdrivers, and a stubby straight-blade screwdriver that properly fits the pilot mixture screw slot. This range of sizes will handle everything down to an M3 sized screw all the way up to the largest screws found on the carbs. These mechanics-grade screwdrivers all feature sturdy comfort-grip handles, knurled chrome plated steel shafts, and “sure-grip” textured, magnetized drive tips.
$ 54.95

HCP21184SET Aftermarket JIS-standard IMPACT-GRADE SCREWDRIVER SET. This set of 3 drivers contains one each of the standard-length #2 and #3 size phillips-drive, JIS-standard impact screwdrivers, and a stubby straight-blade screwdriver that properly fits the pilot mixture screw slot. This range of sizes will handle everything down to an M3 sized screw all the way up to the largest screws found on the carbs. These mechanics-grade screwdrivers all feature sturdy comfort-grip handles, knurled chrome plated steel shafts, and “sure-grip” textured, magnetized drive tips. The inclusion of the impact drivers can make the breakdown of the carb rack much easier.
$ 74.95


Fuel System Service Screwdriver Sets:

These sets are the same as the Carb Rebuild Sets above, but also include the #1 sized phillips-drive JIS-tip screwdriver that will be useful when servicing the petcock.

HCP21185SET Aftermarket JIS-standards MECHANICS-GRADE SCREWDRIVER SET. This set of 4 drivers contains one each of the standard-length #1, #2, and #3 size phillips-drive, JIS-standard screwdrivers, and a stubby straight-blade screwdriver that properly fits the pilot mixture screw slot. This range of sizes will handle everything down to an M3 sized screw all the way up to the largest screws found on the carbs. These mechanics-grade screwdrivers all feature sturdy comfort-grip handles, knurled chrome plated steel shafts, and “sure-grip” textured, magnetized drive tips.
$ 64.95

HCP21186SET Aftermarket JIS-standards IMPACT-GRADE SCREWDRIVER SET. This set of 4 drivers contains the standard-length #1 phillips-drive, JIS-standard screwdriver, one each of the #2, and #3 size phillips-drive JIS-tip impact screwdrivers, and a stubby straight-blade screwdriver that properly fits the pilot mixture screw slot. This range of sizes will handle everything down to an M3 sized screw all the way up to the largest screws found on the carbs. These mechanics-grade screwdrivers all feature sturdy comfort-grip handles, knurled chrome plated steel shafts, and “sure-grip” textured, magnetized drive tips. The inclusion of the impact drivers can make the breakdown of the carb rack much easier.
$ 84.95


Full Service Screwdriver Sets:

HCP21187SET Aftermarket JIS-standards MECHANICS-GRADE SCREWDRIVER SET. This set of 6 drivers contains a set of standard-length of the #1, #2, and #3 size phillips-drive, JIS-standard screwdrivers, one each of the stubby #1 and #2 size phillips-drive JIS-tip screwdrivers, and a stubby straight-blade screwdriver that properly fits the pilot mixture screw slot. This range of sizes will handle everything down to an M3 sized screw all the way up to the largest screws found on the carbs. These mechanics-grade screwdrivers all feature sturdy comfort-grip handles, knurled chrome plated steel shafts, and “sure-grip” textured, magnetized drive tips.
$ 99.95

HCP21188SET Aftermarket JIS-standards IMPACT-GRADE SCREWDRIVER SET. This set of 6 drivers contains a standard-length #1 JIS-tip screwdriver, one each of the #2 and #3 size phillips-drive, JIS-standard impact drivers, one each of the stubby #1 and #2 size phillips-drive, JIS-standard screwdrivers, and a stubby straight-blade screwdriver that properly fits the pilot mixture screw slot. This range of sizes will handle everything down to an M3 sized screw all the way up to the largest screws found on the carbs. These mechanics-grade screwdrivers all feature sturdy comfort-grip handles, knurled chrome plated steel shafts, and “sure-grip” textured, magnetized drive tips. The inclusion of the impact drivers makes the removal of stuck or seized fasteners much easier and more convenient. With this set you can rule the world in style!
$ 119.95



Individual JIS-standards Screwdrivers:

The #2 and #3 size phillips-drive screwdrivers fit the most commonly used size screws on the carbs, gauge clusters, etc.

HCP21181 Aftermarket straight-blade STUBBY SCREWDRIVER, short 1” shaft length, modified to properly fit the pilot mixture screw slotted head.
$ 19.95

HCP21130 Aftermarket size #1 JIS-standards STUBBY SCREWDRIVER, for m2-m4 sized screws, short 1” shaft length.
$ 18.95

HCP21131 Aftermarket size #2 JIS-standards STUBBY SCREWDRIVER, for m3-m5 sized screws, short 1” shaft length.
$ 19.95



HCP5900 Aftermarket size #1 JIS-standards SCREWDRIVER, for m2-m4 sized screws, standard 3” shaft length.
$ 14.95

HCP5901 Aftermarket size #2 JIS-standards SCREWDRIVER, for m3-m5 sized screws, standard 4” shaft length.
$ 17.95

HCP5902 Aftermarket size #3 JIS-standards SCREWDRIVER, for m6-m8 sized screws, standard 6” shaft length.
$ 21.95

HCP5903 Aftermarket size #4 JIS-standards SCREWDRIVER, for m8-up sized screws, standard 8” shaft length.
$ 24.95



HCP21135 Aftermarket size #2 JIS-standards IMPACT SCREWDRIVER, for m3-m5 sized screws, standard 4” shaft length.
$ 27.95

HCP21136 Aftermarket size #3 JIS-standards IMPACT SCREWDRIVER, for m6-m8 sized screws, standard 6” shaft length.
$ 29.95



HCP23600 Aftermarket size #0 JIS-standards SCREWDRIVER BIT, for m2 and smaller size screws. This 1” long bit fits in any standard 1/4” bit holder.
$ 4.95

HCP23601 Aftermarket size #1 JIS-standards SCREWDRIVER BIT, for m2-m4 size screws. This 1” long bit fits in any standard 1/4” bit holder.
$ 4.95

HCP23602 Aftermarket size #2 JIS-standards SCREWDRIVER BIT, for m3-m5 size screws. This 1” long bit fits in any standard 1/4” bit holder.
$ 4.95

HCP23603 Aftermarket size #3 JIS-standards SCREWDRIVER BIT, for m6-m8 size screws. This 1” long bit fits in any standard 1/4” bit holder.
$ 4.95



Hex-Key Wrench Sets:

hks2) These bikes are chock full of various sizes allen-drive or HEX KEY fasteners from front to back........so, you're going to need some quality hex wrenches to deal with all of them eventually. And believe us......the last thing you ever want to do is "round out" the head of a hex-key fastener, or, even worse, snap off the hardened steel shaft of the tool inside the fastener head.

All of the following metric allen-head ("hex key") sets come with their own plastic storage caddy.


HCP11340 Aftermarket long-arm STANDARD HEX KEY SET, black heat-treated alloy steel tools contains the following 9 most common sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm. Nicely organized in their own storage and carrying caddy. Straight tips on both the short and the long arm end. A good basic kit.
$ 10.95

HCP11339 Aftermarket extra long-arm DELUXE BALL-END HEX KEY SET, high strength, heat-treated chrome moly steel tools have a distinctive blue textured finish to allow for easy identification (no mistaking them for SAE wrenches!) and better tool "feel". Laser etched size markings on all the 9 different size: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm. Nicely organized in their own storage and carrying caddy. Straight tips on short arm and ball-end tips on the long arm allow for easier tool insertion, while the extra length of the long arm allows you to exert more torque on stubborn, stuck fasteners. A great set of affordable, high-quality tools.
$ 24.95

HCP11338 Aftermarket straight-shaft T-HANDLE HEX KEY SET, black oxide coated, heat-treated high-carbon steel tools contains the following 10 sizes: 2mm, 2.5mm, 3mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 8mm, and 10mm. Nicely organized in their own storage rack. Straight tips, black plastic handles for sure grip and handling.
$ 17.95




Impact Driver Set:

it24) Aftermarket heavy-duty IMPACT DRIVER SET. When the going gets tough, the tough reach for their Impact Driver.........this is the tool that saves your bacon when nothing else can, along with eliminating incredible amounts of frustration, effort, and expense when you have a REALLY stuck fastener. Their heavy-duty internal ratchet mechanism stands up to the strongest blows from a hammer, while the tool-grade steel drive tips provide long wear and positive contact. Great for helping to remove frozen carb upper and lower rack bracket screws, stuck engine fasteners, and many other uses. 3/8" drive, comes with a set of 4 short bits: one each of a #2 and #3 phillips, and an 8 and 10mm straight slot bit. Metal storage case included.

HCP9706 Aftermarket heavy-duty IMPACT DRIVER SET, includes a full set of four short bits and a storage case.
$ 19.95

HCP9707 Aftermarket heavy-duty replacement IMPACT DRIVER BITS, includes a full set of four short bits.
$ 11.95

HCP9708 Aftermarket heavy-duty replacement IMPACT DRIVER BITS, includes a full set of the four long bits.
$ 12.95



Torque Wrenches:

hks12) Yep, a TORQUE WRENCH sure can be a pain to use, especially in tight, cramped spaces, and so their use is one the easiest ways to tell a professional mechanic from a wanna-be. The proper torque values for a fastener were not determined by whim-and-fancy, but by engineering principles and mechanical fastener requirements. All it takes is one fastener snapping or stripping out of a threaded aluminum case, and you'll find that the cost and use of an accurate torque wrench is "cheap" compared to the cost of solving the problem!

HCP9972 Aftermarket precision CLICKER TORQUE WRENCH, 3/8" drive head, 20-200 inch-pounds (1.5 to 16 foot pounds), ratchet head and handle made of hardened steel for accuracy and durability. Scale is marked in both metric and SAE torque values for convenience. Comes in a plastic storage case. A good quality, affordable torque wrench for small fastener, low-torque applications. NOTE: please resist the temptation to "cheat" on low-value torque fasteners by using a high-value torque wrench (like the HCP9973 below) to set such fasteners. Torque wrenches, by their design, are only accurate within a certain range of torque values, and totally inaccurate above and below their designated range of values.
$ 69.95

HCP9973 Aftermarket precision CLICKER TORQUE WRENCH, 3/8" drive head, 10-100 foot-pounds with +/- 3 accuracy, ratchet head and handle made of hardened steel for accuracy and durability. Scale is marked in both metric and SAE torque values for convenience. Comes in a plastic storage case. A good quality, affordable torque wrench for small fastener, low-torque applications. NOTE: please resist the temptation to "cheat" on low-value torque fasteners by using a high-value torque wrench (like this one) to set such fasteners. Torque wrenches, by their design, are only accurate within a certain range of torque values, and totally inaccurate above and below their designated range of values.
$ 159.95



Combination Box-End and Closed-End Wrench Sets:

hks13) A good quality set of COMBINATION WRENCHES is vital to working properly on your bike.......the one-size-fits-all vise grips are okay in an emergency but not as your one-and-only "wrench"! And neither does 2 sizes of pliers and a big hammer.............so do yourself a favor, and invest in the proper tools needed to do a proper job.

These professional-grade "combination" wrenches have one end "boxed" (closed) and the other end open, giving you the flexibility to take on and conquer any metric fastener you come across.

The standard wrenches feature a raised central panel, and are made from drop-forged, chrome-plated alloy steel, feature 12-point heads, a zero-degree head offset, and include a canvas storage pouch.

The latest-and-greatest ratcheting gear wrenches combine the flexibility of a flat wrench with the features of a ratchet drive (like with a socket set), and also feature a raised central panel, are made from drop-forged, chrome-plated alloy steel, use the 12-point heads, a zero-degree head offset, and come in a plastic storage tray.



HCP15143 Aftermarket combination open-end/box-end STANDARD COMBINATION WRENCH SET, includes 14 wrenches in the most common sizes you'll need: 6mm thru 19mm sizes in 1mm increments, 12-point box heads, chrome finish, zero-degree offset heads, all in a neat canvas storage pouch.
$ 54.95

HCP19423 Aftermarket combination open-end/box-end STANDARD COMBINATION WRENCH SET, includes 5 wrenches in the most common mid-sizes: 20mm thru 24mm, 12-point box heads, chrome finish, zero-degree offset heads, all in a neat canvas storage pouch.
$ 34.95

HCP15145 Aftermarket combination open-end/box-end STANDARD COMBINATION WRENCH SET, includes6 wrenches in the really big and beefy sizes: 25mm, 26mm, 27mm, 29mm, 30mm, and 32mm, 12-point box heads, chrome finish, zero-degree offset heads, all in a neat canvas storage pouch.
$ 59.95



HCP15151 Aftermarket combination open-end/box-end RATCHETING COMBINATION WRENCH SET, includes 7 wrenches in the most common sizes that you'll need: 8mm 10mm, 12mm, 13mm, 14mm, 15mm, and 18mm, 12-point box heads, chrome finish, zero-degree offset, in a plastic storage tray.
$ 69.95

HCP15152 Aftermarket combination open-end/box-end RATCHETING COMBINATION WRENCH SET, includes 12 wrenches in the most common sizes: 8mm thru 19mm in 1mm increments, 12-point box heads, chrome finish, zero-degree offset, in a plastic storage tray.
$ 109.95

HCP15153 Aftermarket combination open-end/box-end X-TRA LONG RATCHETING COMBINATION WRENCH SET, includes 16 wrenches in the most common sizes: 8mm thru 22mm in 1mm increments, and a 24mm wrench, 12-point box heads, chrome finish, zero-degree offset, in a plastic storage tray. These extra-long wrenches are about 25" longer than standard wrenches, allowing you to exert greater torque on a fastener when necessary.
$ 239.95




Socket and Ratchet Sets:

hks14) A good quality SOCKETS AND RATCHET WRENCH SET is also vital to working properly on your bike....and much more convenient, at times, than box- or open-end wrenches. These sockets and ratchet wrench sets
feature a heavy-duty design, capable of being used as standard hand sockets or in impact wrenches or guns.


HCP15154 Aftermarket 3/8" drive SOCKETS AND RATCHET WRENCH SET is made from a black oxide-coated alloy steel material, and features a radiused-corner design in the sockets to prevent rounding off of those really stuck fasteners. All sockets are 6-point design for maximum torque potential, and this 26-piece set includes both standard and deep sockets in 7mm - 19mm sizes, by 1mm increments, and a heavy-duty reversible drive ratchet handle. Comes in a sturdy molded plastic case.
$ 69.95

HCP15155 Aftermarket 3/8" drive SOCKETS AND RATCHET WRENCH SET is made from a chrome-moly alloy steel material, and features a radiused-corner design in the sockets to prevent rounding off of those really stuck fasteners. All sockets are 6-point design for maximum torque potential, and this29-piece set includes both standard and deep sockets in 8mm - 22mm sizes, by 1mm increments, a heavy-duty reversible drive ratchet handle, and a universal swivel joint. Comes in a sturdy molded plastic case.
$ 114.95


HCP15157 Aftermarket 3/8" drive SOCKETS AND RATCHET WRENCH SET is made from a high-strength alloy steel material, and features a radiused-corner design in the sockets to prevent rounding off of those really stuck fasteners. All sockets are 6-point design for maximum torque potential, and this professional quality, 35-piece set includes both standard and deep thin-wall sockets in 7mm - 22mm sizes, by 1mm increments, a heavy-duty reversible drive, quick-release ratchet handle, a universal swivel joint, and a 3" and 6" length "wobble" extension for the maximum flexibility in use. Comes in a sturdy molded plastic case.
$ 169.95

HCP15158 Aftermarket 3/8" drive SOCKETS AND RATCHET WRENCH SET is made from a high-strength alloy steel material, and features a radiused-corner design in the sockets to prevent rounding off of those really stuck fasteners. All sockets are 12-point design for maximum flexibility, and this professional quality, 35-piece set includes both standard and deep thin-wall sockets in 7mm - 22mm sizes, by 1mm increments, a heavy-duty reversible drive, quick-release ratchet handle, a universal swivel joint, and a 3" and 6" length "wobble" extension for the maximum flexibility in use. Comes in a sturdy molded plastic case.
$ 169.95




Specialty Sockets and Wrenches:

it56) Aftermarket specialty SOCKETS and ADAPTERS are for specific-use purposes as described below.


HCP22023 Aftermarket extended depth 19mm SOCKET, used to remove the front wheel axle castle nut on XJ750RL and XJ900 models, and the rear axle castle nut on XJ650, 1981-83 XJ750, and XJ900 models. Chrome-plated, 6-point, 3/8" drive.
$ 11.95

HCP22024 Aftermarket extended depth 22mm SOCKET, used to remove the front wheel axle castle nut on XJ550, XJ650, 1981-83 XJ750, XJ1100 and XS1100 models, and the rear axle castle nut on XJ550, XJ700, and XJ750-X models. Chrome-plated, 6-point, 3/8" drive.
$ 9.95

HCP11336 Aftermarket standard depth 27mm SOCKET, used to remove your swingarm pivot bolt and nut on all XJ650 - XJ1100 models, and the rear axle castle nut on XJ1100 and XS1100 models. Chrome-plated, 6-point, 1/2" drive.
$ 12.95

HCP10530 Aftermarket standard-depth 30mm SOCKET, 1/2"-drive thick-wall impact socket necessary to remove or install the HCP3204 clutch hub nut. Black, 6-point, 1-/2" drive.
$ 13.95


HCP22947 Aftermarket standard-depth 30mm SOCKET, 1/2-drive thin-wall style that will work properly with the HCP1284 spin-on oil filter adapter kit that we offer. Because of the very close tolerances between the outside faces of the nut and the adapter plate recess, you'll need a very thin-wall socket to tighten this nut with. Chrome-plated, 12-point, 1-/2" drive. NOTE: this is a standard (rather than deep) depth socket, and thus it may not work on some models. Yamaha drilled the threaded depth of the oil passage hole (in the engine case, where the threaded stud in our conversion kit will thread into) different lengths on different engines. Since the stud used with our kits must be fully threaded (i.e. “bottomed”) into this threaded hole to work properly, that in turn will leave exposed, on the filter side of the plate, a different length of threads on which to install the retaining nut. And since this socket is used to tighten the retaining nut onto the protruding threads of the stud that sticks up from the adapter plate, there may be engines that have the passage hole drilled shallow, thus resulting in more exposed stud threads protruding from the adapter plate………enough extra thread (4-5) that will not allow this standard-depth socket to fully fit over (and thus “fully reach” and tighten the retaining nut all the way down as required). Our experience shows that about 80% of engines have their passage hole drilled deeply enough to allow the use of this standard depth socket to fully tighten the retaining nut without bottoming out. For the other 20% of engines ---- you’ll need to use one of the deep-drive sockets listed below. Unfortunately, we have no way of telling whether your particular engine has the deeply threaded hole (and thus allows the use of this socket) or not……it appears to be a random thing.
$ 24.95

HCP10298 Aftermarket deep-drive 30mm SOCKET, 1/2-drive thin-wall style that will work properly with the HCP1284 spin-on oil filter adapter kit that we offer. Because of the very close tolerances between the outside faces of the nut and the adapter plate recess, you'll need a very thin-wall socket to tighten this nut with. Chrome-plated, 6-point, 1-/2" drive.
$ 39.95

HCP10299 Aftermarket deep-drive 30mm SOCKET, 1/2-drive thin-wall style that will work properly with the HCP1284 spin-on oil filter adapter kit that we offer. Because of the very close tolerances between the outside faces of the nut and the adapter plate recess, you'll need a very thin-wall socket to tighten this nut with. Chrome-plated, 12-point, 1-/2" drive.
$ 39.95


HCP22025 Aftermarket standard depth 32mm SOCKET, used to remove the special oil filter union bolt used on all XJ550 models, and on all factory-equipped oil-cooler systems used on 1984-85 FJ600, XJ650 Turbo, and XJ900 models. Chrome-plated, 6-point, 1/2" drive.
$ 16.95


HCP10300 Aftermarket 3/8"-to-1/2" DRIVE ADAPTER. For use with the HCP10298, HCP10299, HCP10530, HCP11336, HCP22025, or the HCP22947 sockets, and the 10mm and 12mm HCP10302 stud extractors included in the HCP10301 tool kit. Most people have the standard 3/8" drive ratchet wrenches in their tool kits already, and the larger 1/2" drive sockets can be used with those ratchets with this converter/adapter. Chrome-plated, 1/2" male drive, 3/8" female receiver.
$ 12.95




Extraction Tools:

When it needs to come out, and it tries to stay in place, these tools can help!

it33) Aftermarket handheld EZ-OUT AND LEFT-HAND DRILL BITS SET. Perhaps one of the most important tools you can own when working with older vehicles, as you WILL eventually shear off the head of a screw or bolt and will have to "drill it out". EZ-Outs, of course, are hardened steel spiral extractors that dig into a drilled hole through the center of a fastener for removal, while left-hand (reverse rotation) drill bits "bite" in the opposite direction from a standard drill bit, therefore applying a counter-clockwise (loosening) force to a fastener. These tools can save you a lot of frustration when "the inevitable" happens to you!

HCP9967 Aftermarket EZ-OUT & LEFT-HAND DRILL BITS SET, contains 5 different sizes of extractors (sizes #1 - 5) and 5 different sizes of high-speed, cobalt-coated steel left-hand drill bits (5/64, 7/64, 5/32, 1/4, and 19/64" sizes). Metal storage case included.
$ 49.95




it54) Aftermarket broken stud EXTRACTOR TOOL KIT. Common problem: you snap or shear off the head of a fastener, now what do you do? This happens quite a bit on your exhaust manifold studs and also with the intake manifold bolts. As long as you have a bit of the broken stud remaining outside of the cylinder head threaded hole (in other words, the fastener has not broken off "flush"), then a stud extractor tool is what's going to save your day. Similar in concept to a "ez-out", but these tools have their "biting" surfaces on the inside of a socket-type housing, so that the hardened steel ridges bite into the stud and allow you to extract it. Also works great on screw or bolt heads that have had the drive slot ruined or the bolt head rounded off.

HCP10302 Aftermarket 6mm STUD EXTRACTOR......this is the correct size for both the exhaust headpipe studs and the intake manifold bolts in the cylinder head, which are the most common fasteners that you'll need to use these extractor tools on. You simply pound this extractor onto the stud, and then use an open-end wrench to twist it out.
$ 69.95

HCP10301 Aftermarket complete STUD EXTRACTOR TOOLS SET. Complete set of 4 different size extractors, and these can be used with ratchet wrenches for ease of removal. Contains one each of a 6mm and 8mm extractors (which can be used with 3/8" drive ratchets) and one each of a 10mm and 12mm extractors (which can be used with 1/2" drive ratchets). You simply pound the extractor onto the stud, and then use an appropriate sized ratchet wrench to twist it out. Comes in a molded storage case.
$ 59.95

Or, you can put the power of chemistry to work for you:





js44) Aftermarket dual-tip SEAL PULLER. Our large HCP9801 style puller features curved dual tips on a rounded head allows you to "lever out" large, thick rubber seals safely and properly, while the smaller HCP9961 puller works better with smaller seals (such as on your shifter side cover). These tools are a much better solution than trying to use a screwdriver to pry out seals as they eliminate the risk of scratching or damaging the seal land.

NOTE: in some situations, you can use the following technique to remove larger oil seals that would otherwise require case-splitting to remove. All large oil seals have a metal inner structure that you can (very carefully!) drill into and then pry out:

http://www.xjbikes.com/forums/threads/replacing-the-output-shaft-seal.110522/


HCP9801 Aftermarket rubber LARGE SEAL PULLER TOOL.
$ 14.95

HCP9961 Aftermarket rubber SMALL SEAL PULLER TOOL.
$ 10.95



v) Aftermarket small parts TWEEZER. These 5" long, nickel-plated jewelers tweezers are small enough to reach into tight passages and have pointed tips to grab items easily and securely.

HCP1413 Aftermarket small parts TWEEZER.
$ 5.00



u) Aftermarket o-ring and seal PICK TOOL SET. A very handy set of 4 different style o-ring removal - dental-picks, in a variety of pick angles and styles, all in a handy plastic storage pouch. The HCP1411 picks are a high-quality, professional use style that feature individual pick shafts that interchange into a 5" long, knurled, easy-grip handle, and are small enough to fit easily into the tiny idle mixture screw bores and other such passages. The HCP9974 style feature four different individual picks, each secured into their own impact-resistant, sure-grip plastic handle.

HCP1411 Aftermarket set of four different o-ring and small oil seal PICKS, metal handles.
$ 22.95

HCP9974 Aftermarket set of four different o-ring and small oil seal PICKS, plastic handles, good inexpensive set.
$ 14.95



it32) Aftermarket handheld CENTER PUNCH is useful for making punch points when starting drill bits, etc. These small (5" long, 1/2" diameter knurled body) punches have a hardened alloy steel punch tip, and does not require the use of a striking hammer.

NOTE: the float pin on Mikuni carbs is held in via a friction fit on one end of the pin, and it is not uncommon for these pins to become seized in the posts.........however, one end of the pin is not (from the factory) "mushroomed"................if yours are, it's probably because someone was pounding at it with a punch trying to get it loose, and weren't able to. Any amount of "swollen" or mushrooming of the end of the pin should be gently removed with a file or similar tool, before pin extraction is attempted.

But even in the best of cases, because of the "friction-fit" design of these pins, removing them can be a tricky process. We then recommend you try this trick:

and use a proper sized center-punch (like our HCP17638) to gently punch out the pin. Some good info and images can be found here:

http://xjbikes.com/forums/index.php?threads/19168

But whatever you do, don't try to "force" it out, or it might end up like this:

http://xjbikes.com/forums/index.php?threads/17843


HCP17638 Aftermarket miniature hand-held CENTER PUNCH, proper sized thin point tip is the perfect size for driving out the float pins on Mikuni carbs. Adjustable punch force control and a knurled, sure-grip handle makes this a "must-have" tool when working on your carbs.
$ 18.95

HCP17689 Aftermarket replacement PUNCH TIP for the HCP17638 center punch above.
$ 4.95


HCP9975 Aftermarket miniature hand-held CENTER PUNCH. This punch works exactly like the HCP17638 above, but it has a much broader tip (too large to be used for float pins).
$ 14.95




it62) Aftermarket handheld PIN PUNCH SET allows you do drive out roll pins and such safely and properly. Hard to find metric size punch set contains eight different size punches (1.5mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm, 5.5mm, 6.0mm, and 8.0mm) and comes in a storage pouch.

HCP14192 Aftermarket metric PIN PUNCH SET.
$ 24.95




Files and Gasket Scrapers:

HCP15410 Aftermarket 3/8" square GASKET SCRAPER, 3" long bar of square tool steel cutting block works as an exceptional gasket removal device when it's held flat and worked back-and-forth against a surface such as a cylinder head, the jugs, crankcase cover opening flanges, etc. Simple, easy to use, long-lasting. Will not work on any surface that requires gasket removal in a "recessed" area. Removes old engine case cover or cylinder head gasket remnants effortlessly.
$ 7.95

HCP15434 Aftermarket 3/8" square GASKET SCRAPER, 3" long bar of square cobalt-impregnated, tool steel cutting block works as an exceptional gasket removal device when it's held flat and worked back-and-forth against a surface such as a cylinder head, the jugs, crankcase cover opening flanges, etc. Simple, easy to use, will last a lifetime. Will not work on any surface that requires gasket removal in a "recessed" area. Removes old engine case cover or cylinder head gasket remnants effortlessly.
$ 8.95


HCP6377 Aftermarket long-handled GASKET SCRAPER, forged steel with 1" wide blade (can be re-sharpened), 10-1/2" long, comfort-grip handle. Removes old engine case cover or cylinder head gasket remnants effortlessly.
$ 14.95

HCP6376 Aftermarket set of long-handled GASKET SCRAPER SET, all are made from a black-coated, heat-treated forged alloy steel with a variety of blade sizes and style (blades can be re-sharpened) to cover all situations. Each set has one each of the HCP6377 10-1/2" long tool, an 8" long offset blade scraper, a 7" long x 5/8" wide blade scraper, and a stubby flat-blade scraper tool.
$ 69.95



HCP13101 Aftermarket long-handled BLADE-STYLE GASKET SCRAPER, uses replaceable 1-1/2" wide single-edge disposable blades. 11-1/2" long, comfort-grip handle is also used to store extra blades. Comes with 5 carbon-steel blades and one plastic scraper blade. Order replacement blades HCP13103 below. Great for removing really stuck cylinder head and case gaskets or adhesive precisely and safely.
$ 19.95

HCP13103 Aftermarket replacement set of SCRAPER BLADES, set of 5 stainless-steel 1-1/2" wide blades for the HCP13101 scraper tool above.
$ 2.95


HCP13102 Aftermarket short-handled BLADE-STYLE GASKET SCRAPER, comes with 6 replaceable, 1-7/8" wide carbon-steel single-edge disposable blades. 6" long, comfort-grip handle is also used to store extra blades. Order replacement blades HCP13104 below. Great for removing really stuck cylinder head and case gaskets or adhesive precisely and safely.
$ 9.95

HCP13104 Aftermarket replacement set of SCRAPER BLADES, set of 5 carbon-steel 1-7/8" wide blades for the HCP13102 scraper tool above.
$ 4.95




vv2) Aftermarket small parts NEEDLE FILES SET. This set of 12 miniature swiss files allows you to easily get into those tight spots with precise control. A variety of files----round, flat, triangle---all have easy-grip round knurled handles. Each file is approximately, 6" long.

HCP9802 Aftermarket small parts NEEDLE FILES SET.
$ 19.95




Miscellaneous Tools:

it31) Aftermarket magnetic PARTS STORAGE TRAYS are handy for keeping fasteners and tools in ONE place while you're on your back wrenching. Rubber-backing prevents scratching whatever they're attached to, while their high-strength permanent magnets allow them to be used in any position, even upside-down.

HCP9964 Aftermarket 6" diameter round MAGNETIC PARTS STORAGE TRAY.
$ 8.95

HCP9964 Aftermarket 5 x 9" rectangular MAGNETIC PARTS STORAGE TRAY.
$ 14.95




it34) Aftermarket TELESCOPING MAGNETIC TOOL, also known as a "parts retrieval" tool. Slim, small (1/2" diameter) permanent magnetic tip extends up to 30" to allow you to get into small, deep spots and grab any iron-based material. Also works great for checking steel to determine whether it's stainless or not (stainless steel is much less---or not at all---magnetic as compared to regular alloy steels). Features a special "power-cap" magnetic cover that prevents the magnet from attaching to unwanted surfaces. Can lift five pounds.

HCP9968 Aftermarket TELESCOPING MAGNETIC PICK-UP TOOL.
$ 14.95



Visual Aids:

it46) Aftermarket hi-resolution viewing BOROSCOPE. These amazing devices use a miniature hi-resolution (7200 pixels) camera mounted on the end of a 1/4" diameter flexible (non-obedient) or a 3/8" diameter fixed (obedient) shaft and which allows you to probe all the dark, hidden recesses of things and then display what's "in there" on a full-color screen. Want to see what condition your cylinder walls are in, without pulling the head?: then go in with the magic wand thru the spark plug hole and get a lighted, detailed view. Condition of your primary chain guide? The deep dark recesses of your fuel tank? Just like Superglue, these have a 101 uses.....probably more.

A pressure-sensitive, momentary-on housing mounted light switch allows you to illuminate objects with a powerful halogen lamp and explore items within 3/4" of an inch away, and within a 40-degree field of view, while an integrated focus ring allows for smooth, continuous focusing precision.

HCP10306 Aftermarket BOROSCOPE with 18" long non-obedient shaft.
$ 154.95

HCP10305 Aftermarket BOROSCOPE with 18" long obedient shaft.
$ 154.95

HCP10307 Aftermarket BOROSCOPE with 18" long non-obedient shaft and with obedient shaft attachment......giving you the best of both worlds. This unit also comes with a replacement light bulb, a mirror attachment on the end of the shaft (to provide 90-degree viewing abilities), and a magnetic tip for parts-retrieval tasks.
$ 229.95



it26) Aftermarket waterproof mini LED FLASHLIGHTS feature super-bright, ultra-white, long-life LED's illuminate what you want to see, when you want to see it. Great to have in your toolbox, and small enough to store and carry on your bike. Powered by 3 AAA batteries, their o-ring seals make them water resistant enough to carry around with you on the road.

HCP9976 Aftermarket waterproof mini 9-LED FLASHLIGHT, black plastic case, includes batteries.
$ 7.95

HCP9977 Aftermarket waterproof mini 5-LED FLASHLIGHT, natural aluminum case, includes batteries.
$ 13.95



it27) Aftermarket LED HEADLIGHT, not for your bike but for your head! This handy head-worn light has a rubber and elastic headband and features 9 super-bright Xenon ultra-white, long-life LED's to illuminate what you want to see, when you want to see it, and allows you to keep your hands free to concentrate on fully at the job you're working on. Powered by 3 AAA batteries, which are included.

HCP9978 Aftermarket LED HEADLAMP.
$ 29.95




Infrared Thermometer:

it22) Aftermarket 1000-F degree INFRARED THERMOMETER. A very high quality, very useful tool to have when trying to diagnose a variety of engine and chassis problems. Laser-pointer makes it a simple point-and-shoot tool that takes almost instantaneous readings with a +/- 5-degree range of accuracy. Check exhaust header pipes for equal temperature (a really useful carb tuning procedure), brake rotors, cylinder heads, tires, and much more. Includes a storage case, batteries, and detailed usage instructions.

HCP9803 Aftermarket INFRARED THERMOMETER.
$ 109.95




Heat Gun:

it23) Aftermarket 1100-F degree FLAMELESS HEAT GUN. This good quality, inexpensive heat gun is useful in a variety of situations. Great for helping to remove frozen carb and engine fasteners (it quickly heats up the metal surrounding the stuck fastener, helping to un-seize the fastener threads), applying electrical shrink tubing, removing decals and stripes, and other tasks. Two-speed/heat settings, 600-F and 1000-F. 120V. Can be used stand-alone with supporting clip or hand-held. Includes a air concentrator nozzle. For light-duty use only!

HCP9809 Aftermarket flameless HEAT GUN.
$ 39.95

GENERAL PURPOSE TOOLS:

The “Zestfully Clean” Section:


Cleaning and Polishing Tools and Supplies:

ft2) Aftermarket twisted-stem WIRE-BRISTLE CLEANING BRUSHES. The greatest tool ever invented for cleaning bored and threaded holes, such as in carb bodies, float bowls, even master cylinder piston bores. Available in either 18-8 stainless steel or brass, these brushes not only help make the job of cleaning parts so much easier, but also insure that threaded passages are clean, clean, clean and less likely to strip or deform when fasteners are inserted once again. All brushes have a "finger-loop" in the end to make twisting action easier. Stainless brushes will last longer and can clean more aggressively, so be gentle when using them on aluminum carb bodies and bowls. Brass brushes are gentle on soft metals like carb bodies, but require more effort to produce a cleaner surface and wear out more quickly.


Stainless Steel Wire Bristle Brushes:

HCP1288SS Aftermarket STAINLESS STEEL WIRE-BRISTLE CLEANING BRUSH, 3mm diameter, useful for cleaning the needle entry port of the emulsion tube.
$ 3.95

HCP1406SS Aftermarket STAINLESS STEEL WIRE-BRISTLE CLEANING BRUSH, 4.5mm diameter, the right size for the internal passage within emulsion tube, and brake hose union bolt internal passages.
$ 4.25

HCP1407SS Aftermarket STAINLESS STEEL WIRE-BRISTLE CLEANING BRUSH, 5.5mm diameter, great for the idle mixture screw port threads, the air jet threads, the internal passage within the fuel supply pipes, and the carb bowl drain screw threads.
$ 4.95

HCP1408SS Aftermarket STAINLESS STEEL WIRE-BRISTLE CLEANING BRUSH, 8.0mm diameter, great for the throttle shaft bore and the emulsion tube bore within the carb body on all Hitachi and Mikuni carbs, and is also the correct size for the float bowl fuel outlet port on Mikuni carbs bowls (except XJ or XS1100 model bowls).
$ 5.95

HCP1409SS Aftermarket STAINLESS STEEL WIRE-BRISTLE CLEANING BRUSH, 9.5mm diameter, great for the float valve seat threaded bore in all Hitachi carb bodies, and the fuel supply pipe bores within the carb body on all Hitachi and Mikuni carbs.
$ 6.95

HCP1410SS Aftermarket STAINLESS STEEL WIRE-BRISTLE CLEANING BRUSH, 11.0mm diameter, great for the YICS passage in the cylinder head, the choke plunger seat bore in the carb body, and the float valve seat bores in all Mikuni carbs.
$ 7.95

HCP2762SS Aftermarket STAINLESS STEEL WIRE-BRISTLE CLEANING BRUSH, 12.5mm diameter, used for the master cylinder bore in XJ550 (North American models) master cylinders.
$ 8.75

HCP2912SS Aftermarket STAINLESS STEEL WIRE-BRISTLE CLEANING BRUSH, 14.5mm diameter, great for the master cylinder bore in XJ650 Maxim and XJ1100 rear master cylinders.
$ 8.95

HCP2764SS Aftermarket STAINLESS STEEL WIRE-BRISTLE CLEANING BRUSH, 15.8mm diameter, great for the fuel/air passage bore in the carb body, and the master cylinder bore in XJ550 Euro, XJ650 Euro, XJ650RJ Seca, XJ650 Turbo, XJ700, XJ750, and XJ900 front master cylinders.
$ 9.95

HCP2766SS Aftermarket STAINLESS STEEL WIRE-BRISTLE CLEANING BRUSH, 19.0mm diameter, not really useful for anything carb related, but a really meaty, beefy, big and bouncy brush that looks really impressive in your toolbox!
$ 10.50

HCPSS-SET Complete set of nine different STAINLESS STEEL WIRE-BRISTLE CLEANING BRUSHES SET (all sizes except the 19.0mm), gives you all the sizes needed to clean your carbs, YICS port, and master cylinder bore (when that time comes).
$ 39.95


Brass-Wire Bristle Brushes

HCP1288BR Aftermarket BRASS WIRE-BRISTLE CLEANING BRUSH, 3mm diameter, useful for cleaning the needle entry port of the emulsion tube.
$ 3.75

HCP1406BR Aftermarket BRASS WIRE BRISTLE BRUSH, 4.5mm diameter, the right size for the internal passage within emulsion tube, and brake hose union bolt internal passages.
$ 3.95

HCP1407BR Aftermarket BRASS WIRE-BRISTLE CLEANING BRUSH, 5.5mm diameter, great for the idle mixture screw port threads, the air jet threads, the internal passage within the fuel supply pipes, and the carb bowl drain screw threads.
$ 4.50

HCP1408BR Aftermarket BRASS WIRE-BRISTLE CLEANING BRUSH, 8.0mm diameter, great for the throttle shaft bore and the emulsion tube bore within the carb body on all Hitachi and Mikuni carbs, and is also the correct size for the float bowl fuel outlet port on Mikuni carbs bowls (except XJ or XS1100 model bowls)..
$ 4.95

HCP1409BR Aftermarket BRASS WIRE-BRISTLE CLEANING BRUSH, 9.5mm diameter, great for the float valve seat threaded bore in all Hitachi carb bodies, and the fuel supply pipe bores within the carb body on all Hitachi and Mikuni carbs.
$ 5.75

HCP1410BR Aftermarket BRASS WIRE-BRISTLE CLEANING BRUSH, 11.0mm diameter, great for the YICS passage in the cylinder head, the choke plunger seat bore in the carb body, and the float valve seat bores in all Mikuni carbs.
$ 5.95

HCP2762BR Aftermarket BRASS WIRE-BRISTLE CLEANING BRUSH, 12.5mm diameter, used for the master cylinder bore in XJ550 (North American models) master cylinders.
$ 6.25

HCP2912BR Aftermarket BRASS WIRE-BRISTLE CLEANING BRUSH, 14.5mm diameter, great for the master cylinder bore in XJ650 Maxim and XJ1100 rear master cylinders.
$ 6.95

HCP2764BR Aftermarket BRASS WIRE-BRISTLE CLEANING BRUSH, 15.8mm diameter, great for the fuel/air passage bore in the carb body, and the master cylinder bore in XJ550 Euro, XJ650 Euro, XJ650RJ Seca, XJ650 Turbo, XJ700, XJ750, and XJ900 front master cylinders.
$ 7.95

HCP2766BR Aftermarket BRASS WIRE-BRISTLE CLEANING BRUSH, 19.0mm diameter, not really useful for anything carb related, but a really big, beefy, meaty, bouncy brush that looks really impressive in your toolbox!
$ 8.95

HCPBR-SET Complete set of nine different BRASS WIRE-BRISTLE CLEANING BRUSHES SET (all sizes except the 19.0mm), gives you all the sizes needed to clean your carbs, YICS port, and master cylinder bore (when that time comes).
$ 37.95



ft6) Aftermarket plastic-handled CLEANING TOOTHBRUSHES are great for general cleaning and grunge removal, very handy to keep a few of these around. The garden-variety standard "headless" brushes are just like regular toothbrushes, while the deluxe "headed" style brushes feature additional rows of 135-degree angled brushes at the head (or "snout") of the brush, making it possible to reach into restricted areas and "scrub" smaller areas that the main body of the brush won't or can't reach.

These "headed" brushes are a great time saver and one of the most useful tools that we own......we start to get all panicky and break out in cold chills whenever we start running low on them! And once you try them, we'll wager you'll never go back to the standard style, either..............perfect for cleaning into all the nooks and crannies of carb bodies and bowls, brake calipers, inside oil pans, etc.


HCP9971 Aftermarket standard (headless) nylon-bristles CLEANING TOOTHBRUSH, 7" long, 3 columns wide by 7 rows deep.
$ 1.95

HCP12382NY Aftermarket deluxe "headed" nylon-bristles CLEANING TOOTHBRUSH, 7" long, 3 columns wide by 7 rows deep.
$ 3.95


HCP9970 Aftermarket standard (headless) brass bristle-wire CLEANING TOOTHBRUSH, 7" long, 3 columns wide by 7 rows deep.
$ 1.95

HCP12382BR Aftermarket deluxe "headed" brass bristle-wire CLEANING TOOTHBRUSH, 7" long, 3 columns wide by 7 rows deep.
$ 3.95


HCP9969 Aftermarket standard (headless) stainless steel bristle-wire CLEANING TOOTHBRUSH, 7" long, 3 columns wide by 7 rows deep.
$ 1.95

HCP12382SS Aftermarket deluxe "headed" stainless steel bristle-wire CLEANING TOOTHBRUSH, 7" long, 3 columns wide by 7 rows deep.
$ 3.95




cps2) Aftermarket high-quality WET-OR-DRY FINISHING SHEETS. Since these don't contain "sand", we really can't call them "sandpaper", but you get the idea. A large assortment of ultra-fine finishing paper is just the trick to polish the vacuum pistons and piston bores in your carbs, or master cylinder and brake caliper bores, ridding them of any surface oxidation and minor imperfections that will create interference or friction and prevent the pistons from moving freely---causing all sorts of high-idle (and other problems) in your carbs, or dragging brakes in your calipers. Our recommendation is to start with the 400- or 600-grit paper and move up 200 grit at a time until you get the bores micro-polished to an incredible smooth finish. One 9.5" x 11" sheet of each size will be enough to do four carbs or one pair of calipers; use two sheets of the 5-1/2" x 11" super-fine grit paper.

Of course, this premium finishing paper is just the thing you'll need for prepping any painted surface for painting.

HCP8594 Aftermarket premium grade 400-grit FINISHING PAPER, single sheet, 9.5" x 11". Each:
$ 2.50

HCP8594SET10 Aftermarket premium grade 400-grit FINISHING PAPER, single sheet, 9.5" x 11". Set of 10 sheets:
$ 18.95


HCP8596 Aftermarket premium grade 600-grit FINISHING PAPER, single sheet, 9.5" x 11". Each:
$ 2.50

HCP8596SET10 Aftermarket premium grade 600-grit FINISHING PAPER, single sheet, 9.5" x 11". Set of 10 sheets:
$ 18.95


HCP8597 Aftermarket premium grade 800-grit FINISHING PAPER, single sheet, 9.5" x 11". Each:
$ 2.50

HCP8597SET10 Aftermarket premium grade 800-grit FINISHING PAPER, single sheet, 9.5" x 11". Set of 10 sheets:
$ 18.95


HCP8598 Aftermarket premium grade 1000-grit FINISHING PAPER, single sheet, 5.5" x 11". Each:
$ 1.50

HCP8598SET10 Aftermarket premium grade 1000-grit FINISHING PAPER, single sheet, 5.5" x 11". Set of 10 sheets:
$ 10.95


HCP8599 Aftermarket premium grade 1200-grit FINISHING PAPER, single sheet, 5.5" x 11". Each:
$ 1.95

HCP8599SET10 Aftermarket premium grade 1200-grit FINISHING PAPER, single sheet, 5.5" x 11". Set of 10 sheets:
$ 14.95


HCP8600 Aftermarket premium grade 1500-grit FINISHING PAPER, single sheet, 5.5" x 11". Each:
$ 1.95

HCP8600SET10 Aftermarket premium grade 1500-grit FINISHING PAPER, single sheet, 5.5" x 11". Set of 10 sheets:
$ 14.95


HCP8601 Aftermarket premium grade 2000-grit FINISHING PAPER, single sheet, 5.5" x 11". Each:
$ 1.95

HCP8601SET10 Aftermarket premium grade 2000-grit FINISHING PAPER, single sheet, 5.5" x 11". Set of 10 sheets:
$ 14.95



HCPSANDSET1 Your choice, mix-and-match, any 5 full-size sheets of 400-800 grit paper grades listed above.
$ 10.95

HCPSANDSET2 Your choice, mix-and-match, any 5 half-size sheets of 1000-2000 grit paper grades listed above.
$ 7.95

Return to Top of Page